Don't Let your batteries Explode - Let our valve
Do the talking
Battery vent valves are a crucial component for electric vehicles. The vent secures a stable environment for the installation and keeps it protected against external disturbances. In the case of a thermal event inside one of the battery cells, the valve will open up fast and allow a massive air flow to exit the battery case. This keeps the pressure and temperature inside the battery case low and helps to prevent a thermal runaway propagation.
Reutter + ITIB Group is developing and producing battery vents and cooling tubes according to your specific requirements as well as offering off the shelf application.
Get in touch with our engineering team to address your challenge to us!
Reversible Battery Vent
OIP67 & IP69k ingress protection
600l/h breathing function at 70 mbar*
UL94-V0 conform materials
Mounting with thread M32 (M24)
20 l/s high flow capacity at 300 mbar*
Reversible solution / 100% tested for all functions
*Values can be adjusted
Breathing Unit
IP67 & IP69K ingress protection
Clip-in assembly
Various air exchange rates
Enhanced Safety:
Easy Installation:
Flexible design:
Reversible solution with metal mesh
The battery is one of the most important parts in a BEV. As it is protected inside a sealed battery pack, new requirements to secure a proper function are raised. Therefore a proper working battery venting installation is mandatory.
Tight against dirt and humidity (PTFE membrane solution for breathing)
Customer specific opening pressures can be achieved Small dimension paired with high flow possibility
Thermal event resistant particle filter stays in position after thermal event
Reversible solution allows 100% test before shipment
Filtration down to 0,75 mm particle size
Can be assembled as last part on the final battery pack
Screw assembly form outside of the pack
IP68 & IP69k ingress protection
UL94-V0 conform
75l/s high flow capacity*
<200>
High performance plastics to resist high temperature without self ignition
*capacity at 450 mbar (tuneable)
**function at 300 mbar (tuneable)
Product Details
The battery is one of the most important parts in a BEV. As it is protected inside a sealed battery pack, new requirements to secure a proper function are raised. Therefore a proper working battery venting installation is mandatory.
Tight against dirt and humidity (PTFE membrane solution for breathing)
Customer specific opening pressures can be achieved Small dimension paired with high flow possibility
Thermal event resistant particle filter stays in positive after thermal event
Hybrid ir-reversible solution allows 100% test before shipment
Filtration down to 0,75 mm particle size
Can be assembled as last part on the final battery pack
Screw assembly form outside of the pack
IP68 & IP69k ingress protection
UL94-V0 conform
125l/s high flow capacity
45l/h breathing function
Product Details
The battery is one of the most important parts in a BEV. As it is protected inside a sealed battery pack, new requirements to secure a proper function are raised. Therefore a proper working battery venting installation is mandatory.
Tight against dirt and humidity (PTFE membrane solution for breathing)
Screw-less assembly
("push & turn)"
Can be assembled as last part on the final battery pack
IP68 & IP69k ingress protection
Customer specific opening pressures can be achieved Small dimension paired with high flow possibility
Thermal event resistant particle filter stays in positive after thermal event
45l/h breathing function
UL94-V0 conform
75l/s high flow capacity
Hybrid ir-reversible solution allows 100% test before shipment
Contact us
Felix Schulze
Sales Director
- +49 7195 95987-63
- +49 172 1788 766
- felix.schulze@reutter-group.com
-
Reutter GmbH
Hans-Paul-Kaysser Str.10
71397 Leutenbach - Nellmersbach
Germany
Maximilian Kraus
Head of Innovation
- +49 7195 95987-68
- +49 151 18867 406
- maximilian.kraus@reutter-group.com
-
Reutter GmbH
Hans-Paul-Kaysser Str.10
71397 Leutenbach - Nellmersbach
Germany
Mark Schiefer
Head of Innovation
- +43 6412 7824-11
- +49 160 91828 531
- mark.schiefer@reutter-group.com
-
Reutter GmbH
Hans-Paul-Kaysser Str.10
71397 Leutenbach - Nellmersbach
Germany
About us
What we do
REUTTER / ITIB is a modern company, firmly established in Europe and hosting 6 locations worldwide. Innovative solutions have made us one of the leading companies in our specific industry. Our key area of operations is in developing and producing parts, mostly made of plastic using injection molding, extrusion and blow molding.
Reutter / ITIB Group is developing and producing the following components and systems for global automotive industries:
How we do
Having our background in the standard internal combustion engine area, we as well develop and transform ourself into a reliable partner for the changed challenges coming up with the battery electric vehicle needs. Our group is ideally positioned to develop and produce battery vent valves in a large scale, since the product is combining characteristics, functions and technologies that are well known throughout the existing product portfolio of our group.
Moreover Reutter / ITIB is in position to develop and produce battery coolant systems. Our advanced cooling tubes leverage state-of-the-art manufacturing processes, including blow molding, extrusion, and thermoforming, to deliver reliable thermal management solutions for coolant fluid distribution. As your trusted partner, we are dedicated to providing innovative and effective solutions for your BEV cooling needs.
Global Foot Print
Designed and validated in Germany our battery vents can be produced in 4 plants to satisfy world wide demand:
Your specific RFQ or Project will be supervised by German Sales and Project Management resources that are steering engineering and industrial implementation teams for above mentioned 4 plants. Our Project Managers are your single point of contact and are securing communication is at the point and customer specifications and requirements are well understood and respected.